Altavista EasySearchAll Google Lycos MrWordSmith Overture PocketFlier SearchTraffic Yahoo questa ricerca sul tuo sito - incontri - altre ricerche - guadagna

Random Link! Hosted By HostedScripts.com

POST e codici di errore diagnostici

POST and Diagnostics Error Codes
================================

xxxxx   Description
----------------------------------------------------------------
01x     Undetermined problem errors.

02x     Power supply errors.

1xx     System Board Errors.
101     System Board Error; Interrupt failure.
102     System Board Error; Timer failure.
103     System Board Error; Timer interrupt failure.
104     System Board Error; Protected mode failure.
105     System Board Error; Last 8042 command not accepted.
106     System Board Error; Converting logic test.
107     System Board Error; Hot Non Maskable Interrupt test.
108     System Board Error; Timer bus test.
109     System Board Error; Memory select error.
110     PS/2 System Board Error; Parity check error.
111     PS/2 Memory adapter error.
112     PS/2 MicroChannel arbitration error.
113     PS/2 MicroChannel arbitration error.
121     Unexpected hardware interrupts occurred.
131     PC system board cassette port wrap test failure.
161     System Options Not Set-(Run SETUP); Dead battery.
162     System Options Not Set-(Run SETUP); CMOS checksum/
          configuration error.
163     Time & Date not Set-(Run SETUP); Clock not updating.
164     Memory Size Error-(Run SETUP); CMOS setting does not
          match memory.
165     PS/2 System options not set.
166     PS/2 Micro Channel adapter time-out error.
199     User indicated INSTALLED DEVICES list is not correct.

2xx     Memory (RAM) errors.
201     Memory test failure, error location will be displayed in
          hexadecimal.
202     Memory address error, address lines 00-15.
203     Memory address error, address lines 16-23.
215     PS/2 Motherboard memory failure.
216     PS/2 Motherboard memory failure.

3xx     Keyboard errors.
301     Keyboard did not respond to software reset or a stuck key
          failure was detected.  If a stuck key was detected, the
          scan code for the key is displayed in hexadecimal.
302     System Unit Keylock is Locked.
303     Keyboard Or System Unit Error.
304     Keyboard Or System Unit Error; Keyboard clock high.
305     PS/2 Keyboard fuse (on system board) error.

4xx     Monochrome Display Adapter (MDA) errors.
4xx     PS/2 System board parallel port errors.
401     Monochrome memory test, horizontal sync frequency test,
          or video test failure.
401     PS/2 System board parallel port failure.
408     User indicated display attributes failure.
416     User indicated character set failure.
424     User indicated 80x25 mode failure.
432     Parallel port test failure; monochrome display adapter.

5xx     Color Graphics Adapter (CGA) errors.
501     CGA memory test, horizontal sync frequency test, or video
          test failure.
508     User indicated display attribute failure.
516     User indicated character set failure.
524     User indicated 80x25 mode failure.
532     User indicated 40x25 mode failure.
540     User indicated 320x200 graphics mode failure.
548     User indicated 640x200 graphics mode failure.

6xx     Floppy drive/adapter errors.
601     Floppy drive/adapter Power On Self Test failure.
602     Drive test failure; disk boot record is not valid.
606     Disk changeline function failure; drive error.
607     Disk is write protected; drive error.
608     Bad command; drive error.
610     Disk initialization failure; track 0 bad.
611     Time-out; drive error.
612     Bad Controller chip.
613     Bad Direct Memory Access; drive error.
614     Bad Direct Memory Access; boundary overrun.
615     Bad index timing; drive error.
616     Drive speed error.
621     Bad seek; drive error.
622     Bad Cyclic Redundancy Check; drive error.
623     Record not found; drive error.
624     Bad address mark; drive error.
625     Bad Controller chip; seek error.
626     Disk data compare error.

7xx     8087, 80287, or 80387 math coprocessor error.

9xx     Parallel printer adapter errors.
901     Parallel printer adapter test failure.

10xx    Alternate parallel printer adapter errors.
1001    Alternate parallel printer adapter test failure.

11xx    Asynchronous communications adapter errors.
11xx    PS/2 System board async port errors.
1101    Asynchronous communications adapter test failure.
1102    PS/2 System board async port or serial device error.
1106    PS/2 System board async port or serial device error.
1107    PS/2 System board async port or serial cable error.
1108    PS/2 System board async port or serial device error.
1109    PS/2 System board async port or serial device error.
1112    PS/2 System board async port error.
1118    PS/2 System board async port error.
1119    PS/2 System board async port error.

12xx    Alternate asynchronous communications adapter errors.
12xx    PS/2 Dual async adapter error.
1201    Alternate asynchronous communications adapter test
          failure.
1202    PS/2 Dual async adapter or serial device error.
1206    PS/2 Dual async adapter or serial device error.
1207    PS/2 Dual async adapter or serial cable error.
1208    PS/2 Dual async adapter or serial device error.
1209    PS/2 Dual async adapter or serial device error.
1212    PS/2 Dual async adapter or system board error.
1218    PS/2 Dual async adapter or system board error.
1219    PS/2 Dual async adapter or system board error.
1227    PS/2 Dual async adapter or system board error.
1233    PS/2 Dual async adapter or system board error.
1234    PS/2 Dual async adapter or system board error.

13xx    Game control adapter errors.
1301    Game control adapter test failure.
1302    Joy-stick test failure.

14xx    Matrix Printer errors.

15xx    Synchronous data link control (SDLC) communications
          adapter errors.
1510    8255 port B failure.
1511    8255 port A failure.
1512    8255 port C failure.
1513    8253 timer 1 did not reach terminal count.
1514    8253 timer 1 stuck on.
1515    8253 timer 0 did not reach terminal count.
1516    8253 timer 0 stuck on.
1517    8253 timer 2 did not reach terminal count.
1518    8253 timer 2 stuck on.
1519    8273 port B error.
1520    8273 port A error.
1521    8273 command/read time-out.
1522    Interrupt level 4 failure.
1523    Ring Indicate stuck on.
1524    Receive clock stuck on.
1525    Transmit clock stuck on.
1526    Test indicate stuck on.
1527    Ring indicate not on.
1528    Receive clock not on.
1529    Transmit clock not on.
1530    Test indicate not on.
1531    Data set ready not on.
1532    Carrier detect not on.
1533    Clear to send not on.
1534    Data set ready stuck on.
1536    Clear to send stuck on.
1537    Level 3 interrupt failure.
1538    Receive interrupt results error.
1539    Wrap data compare error.
1540    Direct Memory Access channel 1 error.
1541    Direct Memory Access channel 1 error.
1542    Error in 8273 error checking or status reporting.
1547    Stray interrupt level 4.
1548    Stray interrupt level 3.
1549    Interrupt presentation sequence time-out.

16xx    Display emulation errors (327x, 5520, 525x).

17xx    Fixed disk errors.
1701    Fixed disk POST error.
1702    Fixed disk adapter error.
1703    Fixed disk drive error.
1704    Fixed disk adapter or drive error.
1780    Fixed disk 0 failure.
1781    Fixed disk 1 failure.
1782    Fixed disk controller failure.
1790    Fixed disk 0 error.
1791    Fixed disk 1 error.

18xx    I/O expansion unit errors.
1801    I/O expansion unit POST error.
1810    Enable/Disable failure.
1811    Extender card wrap test failure; disabled.
1812    High order address lines failure; disabled.
1813    Wait state failure; disabled.
1814    Enable/Disable could not be set on.
1815    Wait state failure; disabled.
1816    Extender card wrap test failure; enabled.
1817    High order address lines failure; enabled.
1818    Disable not functioning.
1819    Wait request switch not set correctly.
1820    Receiver card wrap test failure.
1821    Receiver high order address lines failure.

19xx    3270 PC attachment card errors.

20xx    Binary synchronous communications (BSC) adapter errors.
2010    8255 port A failure.
2011    8255 port B failure.
2012    8255 port C failure.
2013    8253 timer 1 did not reach terminal count.
2014    8253 timer 1 stuck on.
2015    8253 timer 2 did not reach terminal count or timer 2
          stuck on.
2017    8251 Data set ready failed to come on.
2018    8251 Clear to send not sensed.
2019    8251 Data set ready stuck on.
2020    8251 Clear to send stuck on.
2021    8251 hardware reset failure.
2022    8251 software reset failure.
2023    8251 software "error reset" failure.
2024    8251 transmit ready did not come on.
2025    8251 receive ready did not come on.
2026    8251 could not force "overrun" error status.
2027    Interrupt failure; no timer interrupt.
2028    Interrupt failure; transmit, replace card or planar.
2029    Interrupt failure; transmit, replace card.
2030    Interrupt failure; receive, replace card or planar.
2031    Interrupt failure; receive, replace card.
2033    Ring indicate stuck on.
2034    Receive clock stuck on.
2035    Transmit clock stuck on.
2036    Test indicate stuck on.
2037    Ring indicate stuck on.
2038    Receive clock not on.
2039    Transmit clock not on.
2040    Test indicate not on.
2041    Data set ready not on.
2042    Carrier detect not on.
2043    Clear to send not on.
2044    Data set ready stuck on.
2045    Carrier detect stuck on.
2046    Clear to send stuck on.
2047    Unexpected transmit interrupt.
2048    Unexpected receive interrupt.
2049    Transmit data did not equal receive data.
2050    8251 detected overrun error.
2051    Lost data set ready during data wrap.
2052    Receive time-out during data wrap.

21xx    Alternate binary synchronous communications adapter
          errors.
2110    8255 port A failure.
2111    8255 port B failure.
2112    8255 port C failure.
2113    8253 timer 1 did not reach terminal count.
2114    8253 timer 1 stuck on.
2115    8253 timer 2 did not reach terminal count or timer 2
          stuck on.
2117    8251 Data set ready failed to come on.
2118    8251 Clear to send not sensed.
2119    8251 Data set ready stuck on.
2120    8251 Clear to send stuck on.
2121    8251 hardware reset failure.
2122    8251 software reset failure.
2123    8251 software "error reset" failure.
2124    8251 transmit ready did not come on.
2125    8251 receive ready did not come on.
2126    8251 could not force "overrun" error status.
2127    Interrupt failure; no timer interrupt.
2128    Interrupt failure; transmit, replace card or planar.
2129    Interrupt failure; transmit, replace card.
2130    Interrupt failure; receive, replace card or planar.
2131    Interrupt failure; receive, replace card.
2133    Ring indicate stuck on.
2134    Receive clock stuck on.
2135    Transmit clock stuck on.
2136    Test indicate stuck on.
2137    Ring indicate stuck on.
2138    Receive clock not on.
2139    Transmit clock not on.
2140    Test indicate not on.
2141    Data set ready not on.
2142    Carrier detect not on.
2143    Clear to send not on.
2144    Data set ready stuck on.
2145    Carrier detect stuck on.
2146    Clear to send stuck on.
2147    Unexpected transmit interrupt.
2148    Unexpected receive interrupt.
2149    Transmit Data did not equal receive data.
2150    8251 detected overrun error.
2151    Lost data set ready during data wrap.
2152    Receive time-out during data wrap.

22xx    Cluster adapter errors.

24xx    Enhanced Graphics Adapter (EGA) errors.

24xx    PS/2 System board Video Graphics Array (VGA) errors.

26xx    XT/370 errors.

27xx    AT/370 errors.

28xx    3278/79 emulation adapter errors.

29xx    Color/graphics printer errors.

30xx    Primary PC Network adapter errors.
3001    Processor test failure.
3002    ROM checksum test failure.
3003    Unit ID PROM test failure.
3004    RAM test failure.
3005    Host Interface Controller test failure.
3006    +/- 12v test failure.
3007    Digital loopback test failure.
3008    Host detected Host Interface Controller failure.
3009    Sync failure and no Go bit.
3010    Host Interface Controller test OK and no Go bit.
3011    Got bit and no Command 41.
3012    Card not present.
3013    Digital failure; fall through.
3015    Analog failure.
3041    Hot carrier; not this card.
3042    Hot carrier; this card!

31xx    Secondary PC Network adapter errors.
3101    Processor test failure.
3102    ROM checksum test failure.
3103    Unit ID PROM test failure.
3104    RAM test failure.
3105    Host Interface Controller test failure.
3106    +/- 12v test failure.
3107    Digital loopback test failure.
3108    Host detected Host Interface Controller failure.
3109    Synch failure and no Go bit.
3110    Host Interface Controller test OK and no Go bit.
3111    Go bit and no Command 41.
3112    Card not present.
3113    Digital failure; fall through.
3115    Analog failure.
3141    Hot carrier; not this card.
3142    Hot carrier; this card!

33xx    Compact printer errors.

36xx    General Purpose Interface Bus (GPIB) adapter errors.

38xx    Data acquisition adapter errors.

39xx    Professional graphics controller errors.

71xx    Voice communications adapter errors.

73xx    3.5" external diskette drive errors.
7306    Disk changeline function failure; drive error.
7307    Disk is write protected; drive error.
7308    Bad command; drive error.
7310    Disk initialization failure; track 0 bad.
7311    Time-out; drive error.
7312    Bad Controller chip.
7313    Bad Direct Memory Access; drive error.
7314    Bad Direct Memory Access; boundary overrun.
7315    Bad index timing; drive error.
7316    Drive speed error.
7321    Bad seek; drive error.
7322    Bad Cyclic Redundancy Check; drive error.
7323    Record not found; drive error.
7324    Bad address mark; drive error.
7325    Bad Controller chip; seek error.

74xx    IBM PS/2 Display adapter (VGA card) errors.

85xx    IBM Expanded Memory Adapter (XMA) errors.

86xx    PS/2 Pointing device errors.
8601    PS/2 Pointing device error.
8602    PS/2 Pointing device error.
8603    PS/2 Pointing device error or System board failure.

89xx    Music feature card errors.

100xx   PS/2 Multiprotocol adapter errors.
10002   PS/2 Multiprotocol adapter or serial device error.
10006   PS/2 Multiprotocol adapter or serial device error.
10007   PS/2 Multiprotocol adapter or communications cable error.
10008   PS/2 Multiprotocol adapter or serial device error.
10009   PS/2 Multiprotocol adapter or serial device error.
10012   PS/2 Multiprotocol adapter or system board error.
10018   PS/2 Multiprotocol adapter or system board error.
10019   PS/2 Multiprotocol adapter or system board error.
10042   PS/2 Multiprotocol adapter or system board error.
10056   PS/2 Multiprotocol adapter or system board error.

104xx   PS/2 ESDI Fixed disk errors.
10480   PS/2 ESDI Fixed disk 0 failure.
10481   PS/2 ESSI Fixed disk 1 failure.
10482   PS/2 ESDI Fixed disk controller failure.
10483   PS/2 ESDI Fixed disk controller failure.
10490   PS/2 ESDI Fixed disk 0 error.
10491   PS/2 ESDI Fixed disk 1 error.